BYD Body Kit Installation: Do You Need to Drill the Car?
The most common question before buying is "do I have to drill the car?" — and the short answer is no: most parts use the original mounting points, the screws already there, and high-strength automotive double-sided tape. Here's when drilling really is needed and how to avoid trouble at the shop.
When you DON'T need to drill
- Front lip and diffuser: fixed from below to the existing points.
- Side skirt: lower screws plus automotive tape.
- Boot-lid spoiler (some models): double-sided tape only.
When drilling MAY be needed
| Part | Reason | Alternative |
|---|---|---|
| Roof-mounted rear wing | Needs a firm hold at speed | A version with reinforced tape |
| Full bumper | It replaces the original part | None — it uses the factory points |
| Made-to-order part | Model-specific fitment | Check before you buy |
Good installation practice
- Test-fit the part before fixing it (dry fit).
- Clean and degrease the surface before applying tape.
- Don't force it: if it won't fit, it's the wrong part for that model year.
- Re-tighten after the first week of use.
How long it takes
A full kit takes 2 to 4 hours at a specialist shop. See also what a body kit is.
See parts by model Request a quote on WhatsApp
Frequently asked questions
Does drilling void the warranty?
Not necessarily, but always prefer parts that use the original mounting points.
Will double-sided tape hold?
Yes, as long as it's proper automotive tape and the surface is clean and degreased.
Can I fit it myself?
We don't recommend it. Correct alignment and a secure fix need a proper workshop.
Note: fitment, drilling requirements and workshop times are for reference only; confirm against the actual vehicle and rely on professional installation.Other categories
Products in this line
- Sport body kit BYD Dolphin (2021-2024)
- Sport body kit BYD Dolphin (2021-2024)
- Sport body kit BYD Han (2022-2025)
- Sport body kit BYD Han (2024)